The CBY series Hand pallet trucks have a simple raise/neutral/lower operating method. To raise the forks, push the actuating lever down and pump the handle up and down until the pallet has reached the desired height. A clearance of one inch between the floor and pallet is usually sufficient to move the load.

To move a load, engage the actuating lever in a neutral or middle position. This position disengages the lifting mechanism, making the handle free from hydraulic resistance, and the forks remain in the raised position. Lower the forks by pulling the actuating lever past the neutral position.Because the leer is spring-loaded for lowering,when you release the lever it will automatically return to the neutral position.

   ◇ Only trained pallet jack operators may operate pallet jacks
   ◇ Do not exceed the manufacturer's load rated capacity; read the lift capacity plate on the pallet jack if you are unsure
   ◇ Do not ride on pallet jacks
   ◇ Start and stop the pallet jack gradually to prevent the load from slipping
   ◇ Pull manual pallet jacks; push them when going down an incline or passing close to walls or obstacles
   ◇ If your view is obstructed, ask a spotter to assist in guiding the load
   ◇ Stop the pallet jack if anyone gets in your way
   ◇ Never place your feet under the pallet jack